User Tools

Site Tools


en:orx:config:settings_main:main

Main settings

Here are defined all the available config properties that will be recognized by orx as main settings.
All these settings can be found in the SettingsTemplate.ini file along with their short descriptions.

Please refer to the syntax page for more info on how to write config files.

Config module

Summary

[Config]
DefaultParent = <string>

Details

Only one section (Config) is defined for this module. Here's a list of its available properties:

  • DefaultParent: This section will be used as implicit parent for any other config section. By default there's no default parent section.

Console module

Summary

[Console]
ToggleKey = KEY_*
ScrollSize = <uint>
Alias = <command>
MyOtherAlias = <command>

Details

Only one section (Console) is defined for this module. Here's a list of its available properties:

  • ToggleKey: Defines the toggle key for activating the in-game console. A list of available keys can be found here. If an invalid key is provided, the console won't be available to the user. Defaults to KEY_BACKQUOTE.
  • ScrollSize: Number of lines to scroll at a time, defaults to 3.
  • Alias: Aliases can be defined as shortcuts for commands. Those shortcuts can include parameters in their order of use. Any other key than ToggleKey will be added as a command alias. Commands are case insensitive. For example, FPS = Config.SetValue Render ShowFPS, will create an alias named FPS. Calling it with FPS true will expand to the final command Config.SetValue Render ShowFPS true and will enable the on-screen display of the framerate. Aliases can be nested.
  • MyOtherAlias: Any other key than ToggleKey will be added as a command alias. Commands are case insensitive.

Clock module

Summary

[ClockTemplate]
Frequency    = <float>
ModifierList = <fixed | multiply | maxed | average>

Details

Only one section (Clock) is defined for this module. Here's a list of its available properties:

  • Frequency: Use 'display' to sync the clock with the display refresh rate. Use 0 to run the clock as fast as possible. Defaults to 'display'.
  • ModifierList: Core clock property. Each entry is a modifier followed by its value. A value of 0 will disable that modifier. Maxed: value will be used as a max DT, fixed: -1 will match exactly the frequency, average: value is the number of past updates to use for average. Defaults to: fixed -1.

Display module

Summary

[Display]
ScreenWidth         = <int>
ScreenHeight        = <int>
ScreenDepth         = <int>
ScreenPosition      = <vector>
RefreshRate         = <int>
FullScreen          = <bool>
Decoration          = <bool>
AllowResize         = <bool>
Title               = TitleText
Smoothing           = <bool>
VSync               = <bool>
DepthBuffer         = <bool>
ShaderVersion       = <int>
ShaderExtensionList = <+ | ->
Monitor             = <int>
Cursor              = arrow | ibeam | crosshair | hand | hresize | vresize | default | path/to/texture # <vector>
IconList            = path/to/texture1 # ... # path/to/textureN 
DebugOutput         = <bool>

Details

Only one section (Display) is defined for this module. Here's a list of its available properties:

  • ScreenWidth: Resolution width for the main display in pixels. Must be provided. For Android, limit the width of the display framebuffer
  • ScreenHeight: Resolution height for the main display in pixels. Must be provided. For Android, limit the height of the display frame buffer (ignored if ScreenWidth is defined).
  • ScreenDepth: Resolution depth for the main display in bits. Defaults to 32bit.
  • ScreenPosition: Only used in windowed mode: position of the window in 'desktop' screen space. Defaults to OS positioning when not specified.
  • FullScreen: Defines if the main display will be full screen or windowed. This property is set to false by default.
  • RefreshRate: Fullscreen refresh rate. Defaults to 60Hz. For Android, defaults to OS refresh rate.
  • Decoration: In windowed mode, this will define if decorations (ie. window borders, buttons, …) will be used for the main display window. This property is enabled by default. Only used when not in fullscreen.
  • AllowResize: Allows manual resize of the window by the user. Only works in windowed mode, defaults to false.
  • DepthBuffer: Defaults to false, set it to true only if you plan on doing 3D rendering on your own and you need a depth buffer to be created.
  • ShaderVersion: If defined, a matching shader version preprocessor directive will be added to the top of fragment shaders. Default is 120 which is shader version 1.20 1).
  • ShaderExtensionList: If defined, shader extension directives will be added to the top of fragment shaders.
  • Monitor: Index of monitor, defaults to 1 = primary monitor.
  • Cursor: Defaults to 'default'. If a texture is provided, an optional vector can be added as the hotspot.
  • IconList: Up to 16 icons can be defined, the one with the best-fitting resolution will be used automatically.
  • DebugOutput: OpenGL platforms only. Applied upon init or when setting video mode, defaults to false.
  • Smoothing: Sets the default rendering smoothing mode (ie. with or without antialiasing). Defaults to false (ie. no antialiasing).
  • Title: Title for the main display. Will be empty if none is provided.
  • VSync: Enables/disables the vertical synchronization. Will use system defaults if none is provided. Best results are usually achieved by enabling this property.

Input module

Summary

[Input] ; Main input section, follows the rules from [InputTemplate]
 
[InputTemplate] ; NB: Up to 16 different bindings can exist in the same set for the same input
DefaultThreshold = <float>
DefaultMultiplier = <float>
JoyIDList = <int>
KEY_SPACE = Jump # Validate
MOUSE_LEFT = Select
KEY_LCTRL = Select
JOY_A_1 = Attack
JOY_LX_2 = Move
+JOY_LX_1 = MoveRight
-JOY_LX_1 = MoveLeft
MOUSE_X = Move
<Name>Threshold = <float>
<Name>Multiplier = <float>
CombineList = Select # Attack

Details

One main section (Input) and as many subsections as defined sets are used for this module. Here's a list of the available parameters for the main Input section:

  • DefaultThreshold: Sets the threshold value 2) under which all input values will be ignored. Defaults to [Input]'s one if defined or 0.15 otherwise.
  • DefaultMultiplier: Defines a value by which all input values will be multiplied. Defaults to [Input]'s one if defined or 1.0 otherwise.
  • JoyIDList: List of joystick IDs (1-based) to consider for generic inputs in this set (ie. JOY_A vs JOY_A_<ID>). Defaults to a list of the first four IDs.
  • KEY_SPACE: Binds space key to the “Jump” and Validate inputs.
  • MOUSE_LEFT: Binds mouse's left button to the “Select” input.
  • KEY_LCTRL: Binds left control to the “Select” input.
  • JOY_A_1: Binds first joystick's A button to the “Attack” input.
  • JOY_LX_2: Binds second joystick's left X axis to the “Move” input.
  • +JOY_LX_1: Binds first joystick's positive left X half-axis to the “MoveRight” input.
  • -JOY_LX_1: Binds first joystick's negative left X half-axis to the “MoveLeft” input.
  • MOUSE_X: Binds mouse's X axis to the “Move” input.
  • <Name>Threshold: Defines a value [0.0, 1.0] under which values for the input <Name> will be ignored. Takes precedence over DefaultThreshold, if defined.
  • <Name>Multiplier: Defines a value by which values of for the input <Name> will be multiplied. Takes precedence over DefaultMultiplier, if defined.
  • CombineList: If an input is in this list, it will activate if and only if all its bindings are active. Otherwise, an input will activate if any of its binding is active. If an action isn't listed here, every time any of its linked physical input is activated, it will be triggered.

NB: Every input action can be linked to up to 4 different physical inputs.

Here are lists of the available physical inputs:

iOS module

Summary

[iOS]
AccelerometerFrequency = <float>

Details

This section is only used for iOS (iPhone/iPod Touch/iPad).

Only one section (iOS) is defined for this module. Here's a list of its available properties:

  • AccelerometerFrequency: Sets the polling frequency, in Hz, of the accelerometer. If explicitely set to 0, the accelerometer will be disabled. Defaults to iOS's default value;

Locale (localization) module

Summary

[Locale]
LanguageList = Language1 # Language2
 
[Language1]
MyTextEntry      = <string>
MyOtherTextEntry = <string>

Details

One main section (Locale) and as many subsections as defined languages are used for this module. Here's a list of the available parameters for the main Locale section:

  • LanguageList: Provides the available languages for the localization module. A language will only be considered valid if a corresponding section with the same name exists. The first valid language of this list will be selected by default for the current language.

For every languages, there can be as many keys as needed. Each key/value pair is made of the key used in code with the orxLocale module 3) and its corresponding content translated in the current language.

Here's a simple example.

[Locale]
LanguageList = English # French
 
[English]
Greetings = Welcome everybody!
 
[French]
Greetings = Bienvenue à tous!

When calling

orxLocale_GetString("Greetings");

the localized content in the current language will be returned.

Mouse module

Summary

[Mouse]
ShowCursor = <bool>
Grab       = <bool>

Details

Only one section (Mouse) is defined for this module. Here's a list of its available properties:

  • ShowCursor: Tells if the mouse cursor should be displayed or not. This property is set to true by default.
  • Grab: Defaults to false.

Param (command line parameters) module

Summary

[Param]
config = path/to/config1 ... path/to/configN
plugin = path/to/Plugin1 ... path/to/pluginN

Details

Only one section (Param) is defined for this module. Every command line parameter registered in code to the orxParam module 4) can be defined here. The long name of the parameter has to be used.

If a param is defined directly on the command line, it will prevail on any value entered in this config section.

Internally, orx defines a config command line parameter allowing to provide extra config files in addition to the main one 5).
It also defines a plugin command line parameter allowing to load external plugins when initialized.

NB: Lists are not used for these properties, you need to provide the parameter value in the same way you would do it on the command line.

To learn how to use orxParam, see: Commandline Parameters for your game or application

Physics module

Module that handles physics interactions.

Summary

[Physics]
Gravity           = <vector>
AllowSleep        = <bool>
IterationsPerStep = <int>
DimensionRatio    = <float>
StepFrequency     = <float>
Interpolate       = <bool>
ShowDebug         = <bool>
CollisionFlagList = <string>

Details

Only one section (Physics) is defined for this module. Here's a list of its available properties:

  • AllowSleep: Defines if objects are allowed to go into sleep mode in the physics simulation when not stimulated by anything. This improves performances in the physics simulation and should be set to true unless you have a good reason. Its default value is true.
  • IterationsPerStep: Defines the number of iterations made by the physics simulation for every step (frame). The higher this number is, the more precise and time consuming the simulation will be. Its default value is 10, don't change it unless you feel you could use a better precision or, on the contrary, a faster physics simulation.
  • DimensionRatio: Defines the ratio between orx's world (sizes are expressed in pixels) and the physics simulation world (sizes are expressed in meters). Defaults to 0.01, ie. 0.01 m/px, which means 1 pixel is represented by 0.01 meters. 6)
  • StepFrequency: Frequency used for fixed-step world physics simulation. Defaults to 0, ie. variable DT (using maximum slices of 1/60s).
  • Interpolate: Use linear interpolation between world physics simulation updates. Only used when StepFrequency is defined. Defaults to true.
  • ShowDebug: Defaults to false. Only used in non-Release builds (ie. Debug and Profiler ones). If set to true, debug shapes will be drawn for all physics bodies in Debug and Profile modes only. Defaults to false.
  • CollisionFlagList: Optional: defines all the literals that can be used to define the SelfFlags and CheckMask properties of Body. This list will grow with every new flag encountered at runtime.
  • Gravity: Defines the gravity vector used in the physics simulation. Please remember that orx 2D vertical axis Y is oriented toward the bottom of your screen 7). If not provide, the gravity will be null, ie. body won't “fall” by default.

Related config options used on objects with bodies can be found at: orxBODY structure

Plugin module

This module provides functions for loading dynamic code into the core engine and finding symbols within the dynamic modules.

Summary

[Plugin]
DebugSuffix = DebugSuffixString

Details

Only one section (Plugin) is defined for this module. Here's a list of its available properties:

  • DebugSuffix : The suffix to add to your game. If none is given, orx will use “d” as default. For example, the debug version of mygame.exe would be mygamed.exe unless specified otherwise.

Render module

Render plugin module. Renders visible objects on screen, using active cameras/viewports.

Summary

[Render]
ShowFPS = <bool>
ShowProfiler = <bool>
ProfilerOrientation = portrait | landscape
ConsoleBackgroundColor = <vector>
ConsoleBackgroundAlpha = <float>
ConsoleSeparatorColor = <vector>
ConsoleSeparatorAlpha = <float>
ConsoleLogColor = <vector>
ConsoleLogAlpha = <float>
ConsoleInputColor = <vector>
ConsoleInputAlpha = <float>
ConsoleCompletionColor = <vector>
ConsoleCompletionAlpha = <float>
ConsoleFontScale = <float>

Details

Only one section (Render) is defined for this module. Here's a list of its available properties:

  • ShowFPS: Displays current FPS in the top left corner of the screen. Its default value is false.
  • ShowProfiler: Displays a layer containing gathered profiling info. Tells orx to display the CPU profiling marker values in real time. Its default value is false.
  • MinFrequency: This defines the minimal frequency for the rendering clock 8). This means that if your game framerate drops below this frequency, your clocks will be provided a DT maxed by this frequency, resulting in a smooth slowdown of your game rather than in a jerky/laggy rendering. Uses your target framerate as value here (often 30 or 60 Hz). Its default value is 60Hz, meaning that a game that won't be able to render at least 60 fps will appear to run slower than it should. Defaults to 10Hz. If you don't want a maxed DT, just set explicitly a negative value.
  • ProfilerOrientation: portrait|landscape; NB: Defaults to landscape;
  • ConsoleBackgroundColor: If specified, will override console's background color.
  • ConsoleBackgroundAlpha: If specified, will override console's background alpha.
  • ConsoleSeparatorColor: If specified, will override console's separator color.
  • ConsoleSeparatorAlpha: If specified, will override console's separator alpha.
  • ConsoleLogColor: If specified, will override console's log color.
  • ConsoleLogAlpha: If specified, will override console's log alpha.
  • ConsoleInputColor: If specified, will override console's input color.
  • ConsoleInputAlpha: If specified, will override console's input alpha.
  • ConsoleCompletionColor: If specified, will override console's completion color.
  • ConsoleCompletionAlpha: If specified, will override console's completion alpha.
  • ConsoleFontScale: If specified, will override console's font scale.

Resource module

Summary

[Resource]
Config             = path/to/storage1 # ... # path/to/storageN
Sound              = path/to/storage1 # ... # path/to/storageN
Texture            = path/to/storage1 # ... # path/to/storageN
WatchList          = Texture # Config # Sound # ... ; NB: If defined, orx will monitor these groups of resources and will reload them as soon as modified. Dev feature, only active on computers;
 
UserResourceGroupX = path/to/storage1 # ... # path/to/storageN

Details

  • Config: Config group: orx will look for resources following the order defined by this list, from first to last.
  • Sound: Sound group: orx will look for resources following the order defined by this list, from first to last.
  • Texture: Texture group: orx will look for resources following the order defined by this list, from first to last.
  • WatchList: If defined, orx will monitor these groups of resources and will reload them as soon as modified. Dev feature, only active on computers.

Only one section (Resource) is defined for this module. This section allows the user to define all the storages9) for all the resource groups.

In addition to orx's own internal groups (respectively Config, Sound and Texture), the user can add his own groups for his own custom resources.

When a resource of a given group is requested, orx will go through all the storages that have been defined for that group10) till a resource with a matching name is found.

By default, orx only has a single resource type11): the file system.

However new custom-defined resource types, such as network URIs, compressed archives, etc…, can easily be added. Please see the Resource tutorial for more info on this12). In that tutorial, the Resource config section is defined in the main config file, and the code for adding a custom resource type can be found in resource.cpp.

As a development feature, orx supports hotloading of modified resources at runtime. This is enabled by defining the “WatchList” list. Resource files defined here will be reloaded when modified on the filesystem, immediately updating them in the game. Additionally, if “Config” watching is enabled, any shaders, spawners, fonts, texts, and sound configuration sections will be updated immediately.

Screenshot module

Summary

[Screenshot]
BaseName  = <string>
Digits    = <int>
Directory = path/to/directory
Extension = <string>

Details

Only one section (Screenshot) is defined for this module. Here's a list of its available properties:

  • BaseName: Base name used for your screenshot. Its default value is “screenshot-”.
  • Digits: Number of digits used at the end of screenshot files. Its default value is 4.
  • Directory: If not specified, screenshots will be stored in the Documents directory on iOS or in the current active directory otherwise.
  • Extension: Extension used for screenshot files. This also defines the type of encoding for the file. Defaults to png on iOS/Android and to tga otherwise; Available extensions are: png, qoi, jpg, bmp & tga.

NB: If using all default settings, screenshots will be stored in the current active directory 13) and named screenshot-0001.tga, screenshot-0002.tga and so on.

SoundSystem module

Summary

[SoundSystem]
DimensionRatio   = <float>
Listeners        = <int>
MuteInBackground = <bool>

Details

Only one section (SoundSystem) is defined for this module. Here's a list of its available properties:

  • DimensionRatio: Defines the ratio between orx's world (sizes are expressed in pixels) and the sound simulation world (sizes are expressed in meters). Defaults to 0.01, ie. 0.01 m/px, which means 1 pixel is represented by 0.01 meters. 14)
  • Listeners: How many listeners will be used (maximum of 4), 0 for no sound spatialization at all. Defaults to 0.
  • MuteInBackground: If true, sound will be muted/un-muted when the game enters/leaves background. Defaults to true.

Latest config settings for the Development Version

We endeavor to keep the config properties on this page up to date as often as possible. For up to the minute config information for the latest version of Orx, check the most recent published at:

CreationTemplate.ini and

SettingsTemplate.ini

Additionally these files can be found under your orx source tree in the orx/code/bin folder.

2)
between 0.0 and 1.0
3)
or referenced by an orxTEXT in config file
4)
whether it's a parameter internally registered by orx or one you registered in your own code
5)
the one named after the executable
6) , 14)
in other words, 100 pixels = 1 meters
7)
you need a positive Y component for your gravity vector for your objects to fall down
8)
which is also the main/core clock
9)
The location containers. For the file system resource type, those are folders.
10)
following a left to right priority order
11)
Except on Android where .apk archives are a separate resource type.
12)
Where support for ZIP files has been taken as an example.
13)
usually the executable's one
en/orx/config/settings_main/main.txt · Last modified: 2023/09/19 23:48 (6 months ago) by sausage